电话:86-021-69132419         邮箱:hyp@zengda.com Sales@zengda.com欢迎来到增达科技!

EN

冷热冲击箱-三箱式

上传时间:2020-12-25


型号
    Model
AZTS 130SAZTS 320S
电源
    Power Supply
交流380V   50赫兹 3相+N+PE
    AC 380V 50HZ 3 phase+N+PE
最大电流
    Maximum Current (SUT/SUTH) (A)
3946
最大功率
    Maximum Power (SUT/SUTH) (KW)
2225.5
使用环境温/湿度
      Operation Environment
+15+35℃/≤85%RH
形式
    Type
三厢式
    Three Zone
控制方式
    Control Mode
独立的冷端和热端PID调节,热量和冷量均可连续调节
    Independent PID regulation of consecutive cooling and heating capacity
性能*1
    Performance
*1
温度范围
    Temperature Range
低温区-80℃~+60℃   高温区 +60~+200℃
    Cold Zone: -80℃~+60℃, Hot Zone: +60~+200℃
温度波动度
    Temperature Fluctuation
≤±0.5℃
恢复时间为15分钟的温度及负载条件
    Test condition with load for 15 minutes recovering time
带5kg电路板-55℃/+125℃
    -55℃/+125℃ with 5kg electrionic board
观察窗
    Inspection Window
多层导电膜加热观察窗,尺寸W240mmxH310mmx1
    Multilayer glasses with conducting film heating, size W240mmxH310mmx1
控制器
    Controller System
AZ-1000控制仪表集成西门子S7可编程控制器
    AZ-1000 controller integrated with Siemens S7 PLC
冷凝方式
    Condenser
风冷冷凝器
    Air-cooled condenser
风冷冷凝器
    Air-cooled condenser
内容积   (升)
    Interior Capacity (L)
124319
内尺寸
    Interior Size
W(mm)580700
D(mm)510700
H(mm)420650
外尺寸
    Exterior Size
W(mm)14002740
D(mm)17801700
H(mm)19502450
标准配置
    Standard Configuration
●   脚轮/Castors
    ● 照明/Lighting
    ● USB接口及历史数据回放及转换软件/USB interface and history data review and converting   software
可选配置
    Optional Configuration
○   电缆孔带硅胶塞Φ25mm/Cable port with silicon plug Φ25mm
    ○ 隔板/Shelf
    ○ 水冷冷凝方式/Water cooled condenser (CST 27 2T, CST 84 2T)
    ○ 外部插座 220V 10A/Exterior socket 220V 10A
    ○ LAN接口及远程控制软件/LAN interface and remote control software
    ○ 数字量输入报警接口x4/Digital alarm input channels x 4
    ○ 数字量输出继电器接口x4 (试验品用)/Auxiliary relay digital output channels x 4 (for   specimens)
    ○ 额外温度采集通道x1 用于测量试验品温度 数据可储存回放(T型热电偶)
       Additional temperature sampling   channels x 1, for sampling temperature of test specimen, data can be reviewed   and recorded (T thermocouple)
    ○ 根据试验品温度切换高低温区功能
       Switching the test zone accoding   to the test specimen temperature
    ○ 额外模拟量采集通道x4 数据可在控制器上储存回放(PT100,T型热电偶,4~20mA,0~10V, -10V~10V可选)
       Additional analog sampling   channels x 4, sampling data can be reviewed and recorded (Option: PT100/T   thermocouple/4~20mA/0~10V/-10V~10V)
    ○ 额外模拟量采集通道x8 数据可在控制器上储存回放(PT100,T型热电偶,4~20mA,0~10V, -10V~10V可选)
       Additional analog sampling   channels x 8, sampling data can be reviewed and recorded (Option: PT100/T   thermocouple/4~20mA/0~10V/-10V~10V)
    ○ 模拟量输出通道x3 (设定高温,设定低温,采样温度)
       Analog output channels x 4   (Setting high temperature/Setting low temperature/measured temperature)
    ○ 干燥新风补偿/Compressed dry air purging system
*1:   性能指标在室温为+25℃时测定;传感器处于空气处理单元出风口;
        All the above specifications are   measured at +25℃ room temperature and the sensors are installed at blow-out   of air conditioning unit;